Menu

T3090

Time domain reflectometer

Product Documents
  • 0-25,000 ft continuous
  • Automatic or manual range selection
  • Optional sectionalizing

Using a radar to pre-locate faults will save time and reduce cable damage. The T3090 is designed to be the most user-friendly radar on the market! Advanced features include one button operation, automatic gain and a large color screen. The T3090 will automatically ‘read’ the cable and display the fault distance with a single thump. The interactive ‘Step-By-Step Easy Mode’ will help train (or re-train) the occasional user while he is on the job! The optional ‘Sectionalize Mode’ will quickly sectionalize faults in loops or radial systems.

Product Documents
Data sheet
Data sheet - T3090
User guide
User guide - T3090
E-Tray Software

ETRAY SOFTWARE UPDATE NOTICE

APPLIES TO: T3090, EZ-RESTORE, EZ-THUMP AND SMART-THUMP

SOFTWARE UPDATE WARNING:

Prior to updating the affected products to software version 2.5.2/0.43 or later, you must first consult the factory via the contact information provided below to determine if your instrument hardware can support the upgrade. Failure to consult the factory prior to performing software upgrades could leave your instrument in a state that will require it to be sent in for repair.

Please have the following information ready before you call:

Contact Us

Customer Service: 1-800-723-2861

ETray Demo for PC (Windows 7 64-bit)
File Date/Revision: 2.6.2.10
SHA1:
cdc34faa8c8507137029efc5950a0caa506672dd
ETrayDemo-v2-6-2-10-20Apr2018.zip
8.2 MB | 11/06/18
E-Tray Product Update Documentation
Software release note detailing changes in E-Tray Software Update
E-TRAY-SW-PRODUCT-UPDATE-2-5-1FW0-40.pdf
166.6 KB | 11/06/18
ETray Software
This is the software for use in the following products:
• EZ-Thump
• EZ-Restore Overdrive
• Smart-Thump
• T3090
File Date/Revision: Software Update 2.6.2.10 / Firmware 0.48
SHA1:
512d20497c69b55f7acfbb67d278cfaf8d07ad8f
ETrayUpdate-2-6-2-10-FW-0-48.zip
1.2 MB | 11/06/18