Menu

10 A DLRO test leads

A selection of test leads for low resistance ohmmeters

  • Carry one lead set and swap terminations
  • Simple push and twist for a quick change
  • Lockable twist cap secures the leads
  • Four terminal 10 A test lead system
  • Warning / Indicator lights for DLRO10 range
  • Extension leads available

Duplex connect test lead system for use with any Megger 10 A DLRO and BT51 instruments. 

The Megger DLRO duplex connect four terminal test lead system is designed to provide the most cost effective and convenient way to provide the user with all off the test lead terminations and lead lengths required for the many different applications encountered in low resistance testing.

At the centre of this unique test lead system is a bespoke connector allowing terminations such as kelvin clips or duplex test probes to be changed as required. There are two connector versions, one being fitted with indicator LEDs that operate with the DLRO10 range of instruments. The indicator LEDs provide enhanced safety and convenience with indications as follows:

DLRO10 and DLRO10HD
Warning of connection to hazardous live voltage
When continuity is made
When a test complete and measurement is on instrument display

DLRO10X adds
Indication of pass / fail to user set test limits

All of these important indications are therefore seen near the point of connection without needing to view the instrument display. There is even a 6 m extension lead to provide the ultimate in flexibility.