- VLF, DC and sheath fault testing in one device
- Portable thanks to two-part construction
- High test capacitance
- Integrated discharge system
The portable, high-performance and energy-efficient VLF test systems are used for testing cables with 0.1 Hz cosine-rectangular voltage according to IEC/IEEE/CENELEC standards. In accordance with guidelines, the dielectric strength of cables and joints must be checked after installation or repair.
The VLF test systems from SebaKMT have high test-capacities and are still compact, because of the patented voltage wave-shape and the power-recycling during polarity reversal. Aside from cable and sheath testing, the test systems can also be used for the precise pinpointing of sheath faults (in combination with a step-voltage probe).
In total three portable systems are available, each with different voltage levels (28, 40 and 60 kVrms):
- VLF CR-28 up to cable series 15 kV
- VLF CR-40 up to cable series 23 kV
- VLF CR-60 up to cable series 35 kV
Data sheet - VLF28, VLF40 and VLF60 kV
User guide - VLF CR 40/60