Menu

Smart Thump ST Series

16 kV portable cable fault location system

  • Delivers 1500 J at 8 or 16 kV
  • 16 kV DC high voltage proof test and insulation resistance test
  • Easy Go automatic test sequence to proof test, prelocate and pinpoint
  • Interprets test results for user
  • 5.7 in. transflective color display
  • Safety / grounding check
  • USB interface

The SMART THUMP ST Series of cable fault locators provides safe, efficient and easy-to-use solution for quickly identifying, prelocating and pinpointing various types of cable faults for power cables. The ST Series was developed to meet the requirements for typical low- and medium-voltage distribution cable fault location markets.

Circuit parameters include: System voltage up to 35 kV Insulation EPR or XLPE Typical conductor sizes between 34 mm2 to 250 mm2. Typical circuit lengths from 100 m up to 17,000 ft or 5,000 m.

Typical end users include: operations department of power utility The ST Series incorporates E-Tray technology, a concept that has been already proven in other products (EZThump, EZ-Restore Overdrive, and TDR T3090) and which will be carried forward into new Megger products in the future.

The E-Tray adds the unique capability to access and operate every function through an innovative and intuitive user interface, without the need to make adjustments and the software suggests the next logical step.

Product Documents
Data sheet
Data sheet - Smart Thump ST Series
User guide
User guide - Smart Thump 16
E-Tray Software

ETRAY SOFTWARE UPDATE NOTICE

APPLIES TO: T3090, EZ-RESTORE, EZ-THUMP AND SMART-THUMP

SOFTWARE UPDATE WARNING:

Prior to updating the affected products to software version 2.5.2/0.43 or later, you must first consult the factory via the contact information provided below to determine if your instrument hardware can support the upgrade. Failure to consult the factory prior to performing software upgrades could leave your instrument in a state that will require it to be sent in for repair.

Please have the following information ready before you call:

Contact Us

Customer Service: 1-800-723-2861

ETray Demo for PC (Windows 7 64-bit)
File Date/Revision: 2.6.2.10
SHA1:
cdc34faa8c8507137029efc5950a0caa506672dd
ETrayDemo-v2-6-2-10-20Apr2018.zip
8.2 MB | 11/06/18
E-Tray Product Update Documentation
Software release note detailing changes in E-Tray Software Update
E-TRAY-SW-PRODUCT-UPDATE-2-5-1FW0-40.pdf
166.6 KB | 11/06/18
ETray Software
This is the software for use in the following products:
• EZ-Thump
• EZ-Restore Overdrive
• Smart-Thump
• T3090
File Date/Revision: Software Update 2.6.2.10 / Firmware 0.48
SHA1:
512d20497c69b55f7acfbb67d278cfaf8d07ad8f
ETrayUpdate-2-6-2-10-FW-0-48.zip
1.2 MB | 11/06/18